IBM IntelliStation Z Pro 6221, Руководство по техническому обслуживанию аппаратной части, Страница: 109 / 168

Error code/symptom FRU/action
962
(Parallel port error)
1. Disconnect external cable on parallel port.
2. Run Configuration/Setup.
3. System board.
998
(Automatic Restart or AC
power restored)
v
No action required.
999
(System recovered from
backup BIOS)
v
Reflash BIOS code.
11XX
(System board serial port 1 or
2 error)
1. Disconnect external cable on serial port.
2. Run Configuration/Setup.
3. System board.
1162
(Serial port configuration
conflict)
1. Disconnect external cable on serial port.
2. Run Configuration/Setup.
3. System board.
1301
(I2C cable to front panel not
found)
1. Cable
2. Front panel
3. Power switch assembly
4. System board
1302
(I2C cable from system board
to power on and reset
switches not found
1. Cable
2. Power switch assembly
3. System board
1303
(I2C cable from system board
to power backplane not
found)
1. Cable
2. Power backplane
3. System board
1304
(I2C cable to diagnostic LED
board not found)
1. Power switch assembly
2. System board
1600
(Advanced System
Management processor is not
functioning)
1. Verify system-management processor jumpers are set correctly.
2. Disconnect computer from power source, wait 30 seconds, reconnect, and retry.
3. System board.
1601
(Advanced System
Management flash update is
needed)
1. Flash update Advanced System Management processor.
2. System board.
1762
(Fixed Disk Configuration
error)
1. Fixed disk drive.
2. Fixed disk cable.
3. Run Configuration/Setup.
4. Fixed disk adapter.
5. SCSI backplane.
6. System board.
Symptom-to-FRU index
99