IBM IntelliStation M Pro 6868-5BU, Руководство по системной интеграции

Страница: 53 / 114

4-7
Installing the Avid Board Set
Before You Start the Installation
If you did not install memory, before you start the installation of the
Avid boards, you must make sure of the following:
• The system was turned off in a proper manner.
• The power cord is removed from the rear of the system.
• You read the User Guide IntelliStation M Pro Type 6868 Professional
Workstation for instructions that explain how to open the system
and install the PCI boards.
• You use a proper antistatic grounding wrist strap during the
installation.
• You know the revision levels of the software and hardware (see
the release notes for your Avid Xpress system).
• You determine the display controller board you have for use
during the driver installation section of this guide.
• You determine the slot locations of each board for your system
(see “Avid Xpress Board Configurations” on page 4-5).
n
The following sections are placed in the order that you might want to remove
and install boards. In general, you should start putting boards in at PCI slot
5 (if you have disk controller boards) and work your way up the PCI slot
numbers.