IBM IntelliStation M Pro 6868-5BU, Руководство по системной интеграции

Страница: 89 / 114

7-5
Installing Optional Disk Controller Drivers
n
If Avid Startup starts, close the window and continue.
11. A dialog box appears asking if you want to restart the system.
Click No.
12. The SCSI Adapters dialog box now shows the UL3D dual-channel
controller. Click OK.
13. The driver is copied automatically and the system must be
restarted to install the driver.
14. Do not click Yes to restart the system.
15. Remove the floppy disk and the application CD-ROM (if
needed) from the system
.
Installing the Emulex LP850 Fibre Channel Driver
If the system contains an Emulex LightPulse LP850 Fibre Channel
controller, you should use this procedure to install or update the
Windows NT device driver. The proper Emulex Fibre Channel device
drivers are not included with the Windows NT Workstation 4.0 or
Windows NT Service Pack distributions and must be installed
separately. Only follow this procedure if you have the Emulex LP850
controller installed in the system.
Driver name: LP6NDS35
Use the following procedure to install or update the driver:
1. Open the Control Panel and double-click the SCSI Adapters icon.
2. From the SCSI Adapters dialog box, click the Drivers tab and
check for an existing Emulex LP6000/LP7000/LP8000/LP850
PCI-Fibre Channel Adapter driver.
3. If the driver is not present go to step 4. Otherwise, select the driver
and click the Remove button. Click Yes to the “Are you sure you
want to remove this driver?” dialog.
4. Click the Add button.