IBM infoprint 1764, Руководство пользователя

Страница: 30 / 108

Printing a font sample list
30
Printing
4
Press until
Network Setup Page
appears, and then press .
Note: If an internal print server is installed,
Print Net1 Setup
appears on the display.
5
Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected”, the LAN drop may not be active, or the network cable may be malfunctioning. Consult a
system support person for a solution, and print another network setup page to verify that the printer is connected to the
network.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and the
Ready
message appears.
2
Press on the operator panel.
3
Press until
Reports
appears, and then press .
4
Press until
Print Fonts
appears, and then press .
5
Press until appears next to
PCL Fonts
,
PostScript Fonts
, or
PPDS Fonts
, and then press .
Note:
PPDS Fonts
only appears if PPDS is activated on the printer.
Printing a directory list
A directory listing shows the resources stored in flash memory or on the hard disk. To print a listing:
1
Make sure the printer is on and the
Ready
message appears.
2
Press on the operator panel.
3
Press until
Reports
appears.
4
Press .
5
Press until
Print Directory
appears.
6
Press .
The message
Printing Directory List
appears on the display.
The printer returns to the Ready state after the directory list prints.
Note:
Print Directory
is only available if you have a flash memory or hard disk installed.
Loading the trays
Helpful hints:
• Never mix media types within a tray.