IBM HS12 - BladeCenter - 8028, Руководство по обслуживанию

Страница: 19 / 204

Table 1. Features and specifications
Microprocessor: Supports one Intel
®
LGA-771 microprocessor
Note: Use the Configuration/Setup
Utility program to determine the type
and speed of the microprocessors in
the blade server.
Memory:
v
Dual-channel, dual inline memory
modules (DIMMs): 6 DIMM
connectors
v
Type: ECC double-data rate (DDR2
667) DRAM. Supports 512 MB, 1
GB, 2 GB, and 4 GB DIMMs with
up to 24 GB of total memory on the
system board
Drives: Support for a pair of one of
the following storage drives:
v Hot-swap, small form factor (SFF)
Serial Attached SCSI (SAS) hard
disk drives, and hot-swap solid
state storage drives.
v
Fixed SFF Serial Advanced
Technology Attachment (SATA)
hard disk drives
v
Fixed SFF SATA solid state storage
drives
Predictive Failure Analysis (PFA)
alerts:
v Microprocessor
v
Memory
v Hard disk drives
Electrical input: 12 V dc
Integrated functions:
v
Expansion card interface
v
Local service processor: Baseboard
management controller (BMC)
with Intelligent Platform
Management Interface (IPMI)
firmware
v
ATI ES1000 video controller
v
LSI 1064E SAS controller (type
8028 and 1916)
v
SATA controller (type 8014)
v Concurrent keyboard/video/
mouse (cKVM) support when
optional cKVM feature card is
installed
v
Light path diagnostics
v
RS-485 interface for
communication with the
management module
v
Automatic server restart (ASR)
v
USB 2.0 for communication with
the cKVM and removable media
drives
v
Serial over LAN (SOL)
v Redundant buses for
communication with keyboard,
mouse, and removable media
drives
Environment:
v
Air temperature:
– Blade server on: 10°C to 35°C
(50°F to 95°F). Altitude: 0 m to
914.4 m (0 ft to 3000 ft)
– Blade server on: 10°C to 32°C
(50°F to 89.6°F). Altitude: 914.4 m
to 2133.6 m (3000 ft to 7000 ft)
– Blade server off: 10°C to 43°C
(50°F to 89.6°F). Altitude: 914.4 m
to 2133.6 m (3000 ft to 7000 ft)
– Blade server shipping: -40°C to
60°C (-40°F to 140°F)
v
Humidity:
– Blade server on: 8% to 80%
– Blade server off: 8% to 80%
Size:
v
Height: 24.5 cm (9.7 inches)
v Depth: 44.6 cm (17.6 inches)
v
Width: 2.9 cm (1.14 inches)
v Maximum weight: 4.8 kg (10 lb)
Blade server controls and LEDs
Use this information for details about the controls and LEDs on the blade server.
Note: The control panel door is shown in the closed position in the following
illustration. To access the power-control button, you must open the control panel
door.
Chapter 2. Introduction
7