IBM CT-618, Руководство по установке

Страница: 77 / 84

Appendix C: Specifications
IBM CTS Installation Guide 71
BLU-VIO Ext 15 - Tip 21 46 Ext 15 - Ring VIO-BLU
ORN-VIO Ext 16 - Tip 22 47 Ext 16 - Ring VIO-ORN
GRN-VIO Ext 17 - Tip 23 48 Ext 17 - Ring VIO-GRN
BRN-VIO Ext 18 - Tip 24 49 Ext 18 - Ring VIO-BRN
SLT-VIO n/c 25 50 n/c VIO-SLT
Notes:
1. SLT (Slate) is sometimes referred to as GRY (Gray).
2. The Ext xx numbers correspond to the default extension numbering scheme,
so that Ext 1 is extension 201 on the first CT-618 board, 219 on the second
CT-618 board, etc.
3. The power down fail-safe mode of the CT-618 board connects Trunk 1 (Tip
and Ring) to Ext 1 (Tip and Ring). For this reason, we recommend that Ext
1 be used for the Operator extension (201) in normal usage.
15.4 PBX CT-618 Functions
When first installed, the following default PBX keypad commands are in effect.
Note that these defaults may change with subsequent versions of the IBM
Telephony software.
Normal extension handset dialing
201-299 Place a call to extension 201 through 299.
9+7 digits Connect to a trunk and dial a local call.
1+10 digits Connect to a trunk and dial a non-local call.
9+11 digits Connect to a trunk, wait for a dial tone, and dial all digits
911 Connect to a trunk, wait for dial tone and dial 911.
0 Place a call to the Operator (default is extension 201).
** Listen to recorded IBM CT Help.
*2 Make all held calls a conference, joining the conference yourself
(*2=*C -
C onference).