IBM CT-618, Руководство по установке

Страница: 31 / 84

Upgrade Installations
IBM CTS Installation Guide 25
Note: If you have chosen an installation directory other than the
default of C, then IBMCT/SYSTEM will be in that directory. If your
server is set up as NTFS, use the files on the diskette you created
earlier.
14. Restart server in Windows NT.
15. Configure telephony services to autostart:
a) From the Start menu, navigate to Programs/TSAPI Telephony
Services/TSAPI Telephony Services Controller.
b) Check box for Auto Load.
c) Click Start (if not already running), then click Close (display should be:
Status=Running, Startup=Automatic).
16. Test your installation. You should have dial tone on an extension connected
to the IBM Telephony server.
4.3 Upgrading the Translation Table
The translation table supplied with this release has entries that support new
product features. Since an upgrade installation does not replace your existing
translation table, you must upgrade the table manually in order to take advantage
of the new features. Refer to the IBM Computer Telephony Administration Guide
for additional information about working with the CT-618 translation table.
1. Start the IBM Telephony Administration utility and go to the Translation
Table tab.
2. Select Read from NetPhone from the Translations menu. This will read your
current information.
3. Select Save to File from the Translations menu to save a reference copy of
your file.
4. Select Read from File from the Translations menu, and read in the default
table file (Default_24.trn) supplied on the CD.
5. Make any desired edits (using your saved file as a reference for previous
modifications).
6. When complete, select Write to NetPhone from the Translations menu to
write the new information to the board.