IBM CT-618, Руководство по установке

Страница: 33 / 84

Installing CT-618 Hardware
IBM CTS Installation Guide 27
5. Installing CT-618
Hardware
5.1 Unpacking the CT-618 Board
CAUTION: The CT-618 board is packed in antistatic material to protect it
during shipment. To avoid damaging any highly static-sensitive components on
the CT-618 board or the computer, be sure to reduce any static on your person.
One way to do this is to touch the metal chassis of your computer. You can
maintain grounding by wearing a wrist strap attached to the chassis.
1. Carefully lift the CT-618 board and other items out of the box by removing
the inner protective carrier.
2. Remove the CT-618 board from its anti-static foam, holding it by the edges.
3. Check the CT-618 board for any visible signs of damage. If you find a
problem, immediately notify your supplier and the carrier that delivered the
CT-618 board.
Retain all packing materials and store in a safe place. If you should need to
return the CT-618 board, pack it in the original (or equivalent) packing material.
5.2 Important Safety Information
DANGER: The CT-618 board is to be installed only by authorized service
personnel.
DANGER: La carte CT-618 doit être installée par un technicien autorisé
seulement.
The board should only be installed in a computer that (1) has a proper fireproof
enclosure in compliance with UL 1950 (3rd ed.), and (2) is connected to a socket-
outlet with a protective earthing connection.