IBM 9114-275 - IntelliStation POWER 275, Руководство по установке, Страница: 49 / 102

13. Lower the tab onto the PCI adapter faceplate. Rotate the adapter retainer clip clockwise until it covers
the tab at approximately a 45-degree angle. See the following illustration.
1
2
3
4
5
1 Model 275 4 Adapter Retainer Assembly (retainer seat
down and the retainer clip in the locked
position)
2 Adapter Retainer Assembly (in the unlocked
position) 5 PCI adapter faceplate (dotted lines)
3 Adapter Retainer Assembly (retainer seat
down and the retainer clip in the unlocked
position)
14. If you have other options to install, refer to “Options and Task List” on page 24. If you do not have
other options to install, continue on to the next step.
15. Replace the service access cover as described in “Service Access Cover Replacement” on page 28.
16. Return the system to the operating position as described in “Placing the Model 275 into the Service
and Operating Position” on page 26.
17. Connect the adapter cables.
18. Reconnect the power source to the system.
19. Power on the system as described in “Starting the System” on page 25.
20. Replace the bezel door if it was removed in one of the previous steps.
Chapter 3. Installing Options
33