IBM 9114-275 - IntelliStation POWER 275, Руководство по установке, Страница: 23 / 102

Step 10. Connect the Graphics Display
Note: If you are using an ASCII terminal as the console for this system, and do not have a graphics
display to connect, continue with “Step 12. Connect the Serial Devices, Parallel Devices, and ASCII
Terminal” on page 9.
As shown in “Step 9. Attach the Display Cable Toroid” on page 6, connect the graphics display cable to the
back of the display and to the graphics adapter connector. For the locations of installed adapters, consult
the
″
About Your Machine
″
document.
For more information about your display, refer to the documentation included with the display.
Notes:
1. A PCI 2D graphics adapter or 3D graphics adapter can be installed in any of the six PCI slots.
2. Some displays require an additional cable.
1 Display Cable
Chapter 1. Setting Up the System
7