IBM 9114-275 - IntelliStation POWER 275, Руководство по установке, Страница: 31 / 102

Step 20. Start Your Model 275
To power on the system, do the following:
1. Open the bezel door.
2. Before you press the power button on your operator panel, observe the following:
v The power LED is slowly blinking.
v
An
OK
prompt is visible in the operator panel display.
1 Operator Panel Display 5 Power LED
2 Front Serial Connector (FS1) 6 Power-On Button
3 Attention LED 7 Power-On Guard
4 System Reset Button 8 Service Processor Reset Switch (Pinhole)
9 Serial Number Label
3. Press the power-on button on the operator panel.
After you press the power-on button located on the operator panel, observe the following:
a. The power LED begins to blink visibly faster.
b. The system cooling fans are activated after a short interval and can be heard accelerating to
operating speed.
Note: There is approximately a 30-second transition period between the time the power-on button
is pressed and the power LED remains on solid (no longer blinking).
c. The power LED stays on solid. Progress indicators, also referred to as checkpoints , are visible on
the operator panel display.
Chapter 1. Setting Up the System
15