IBM 9114-275 - IntelliStation POWER 275, Руководство по установке, Страница: 47 / 102

9. Rotate the adapter retainer clip counterclockwise, as shown in the following illustration.
1
2
3
6
4
5
7
1 Model 275 5 PCI adapter faceplate (dotted lines)
2 Adapter Retainer Assembly 6 Adapter Retainer Assembly (in the unlocked
position)
3 Adapter Retainer Assembly (retainer seat
down and the retainer clip in the locked
position) 7 PCI Adapter
4 Adapter Retainer Assembly (retainer seat
down and the retainer clip in the unlocked
position)
10. The tab resting on the adapter retention bracket springs to a vertical position, coming to rest next to
the adapter retention latch.
11. Carefully grasp the PCI adapter by its top edge or upper corners, and remove it from the system.
Store the adapter in a safe place.
12. If you do not plan to install another adapter into the vacated slot, seal the expansion slot using an
expansion-slot cover and continue on to the next step. If you are installing another adapter, go to
“Adding or Replacing a Non-Hot-Pluggable PCI Adapter” on page 32.
13. If you have other options to install, refer to “Options and Task List” on page 24. If you do not have
other options to install, continue on to the next step.
14. Replace the service access cover as described in “Service Access Cover Replacement” on page 28.
15. Connect the adapter cables.
16. Reconnect the power source to the system.
17. Return the system to the operating position as described in “Placing the Model 275 into the Service
and Operating Position” on page 26.
Chapter 3. Installing Options
31