IBM 8835 - Eserver 325 - 1 GB RAM, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 71 / 164

Riser card
Complete the following steps to remove the riser card.
Note:
v
Read “Installation guidelines” on page 25.
v
Read the safety notices at “Safety information” on page 101.
v
Read “Handling static-sensitive devices” on page 25.
1. Turn off the server and any attached devices.
2. Disconnect power cords and external cables from the back of the server.
3. Remove the server from the rack.
4. Remove the cover (see “Removing the cover and bezel” on page 27).
5. Remove adapters (see “Working with adapters” on page 28).
System board
Riser card
6. Pull up gently on the riser card until it detaches from the server.
To replace the riser card, reverse the preceding steps.
Chapter 6. Service replaceable units
61