IBM 8835 - Eserver 325 - 1 GB RAM, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 11 / 164

Chapter 1. General information
The IBM
Eserver
325 Type 8835 server is a 1-U-high
1
rack model server for
high-volume network transaction processing. This high-performance, symmetric
multiprocessing (SMP) server is ideally suited for networking environments that
require superior microprocessor performance, input/output (I/O) flexibility, and high
manageability.
Performance, ease of use, reliability, and expansion capabilities were key
considerations in the design of your server. These design features make it possible
for you to customize the system hardware to meet your needs today and provide
flexible expansion capabilities for the future.
The model number and serial number are on the ID label on the right mounting
bracket on the server, as shown in the following illustration.
Note: This illustration shows a SCSI model server. An IDE non-hot-swap hard disk
drive model is also available. This illustration might differ slightly from your
hardware.
ID label
If you have access to the Internet, you can obtain up-to-date information about your
server and other IBM server products at http://www.ibm.com/eserver/xseries/.
For service, assistance, or information, see Appendix A, “Getting help and technical
assistance,” on page 99.
1. Racks are marked in vertical increments of 1.75 inches each. Each increment is referred to as a unit, or a “U”. A 1-U-high device
is 1.75 inches tall.
© Copyright IBM Corp. 2002, 2003
1