IBM 84875MU, Руководство пользователя

Страница: 20 / 160

2. When the message
Press F1 for Configuration/Setup
appears, press F1. If
an administrator password has been set, you must type the administrator
password to access the full Configuration/Setup Utility menu.
3. Follow the instructions on the screen.
For more information on using the Configuration/Setup Utility program, see the
User’s Guide on the IBM xSeries Documentation CD.
Using the Adaptec HostRAID configuration programs
Use the Adaptec RAID Configuration Utility programs and SCSISelect Utility (also
referred to as IBM ServeRAID-7e) to add RAID levels 0 and 1 functionality to the
integrated Serial ATA controller and the SCSI controller. Use these programs to:
v
Configure a redundant array of independent disks (RAID) array
v View or change your RAID configuration and associated devices
Detailed information about using these programs is in the User’s Guide on the IBM
xSeries Documentation CD. Be sure to use these programs as described therein.
The latest information about these programs and the most recent device-driver files
are available at www.ibm.com/pc/support.
Using the Intel Gigabit Ethernet Utility program
The Intel Gigabit Ethernet Utility program is part of the BIOS code in the server. You
can use it to configure the network as a startable device, and you can customize
where the network startup option appears in the startup sequence.
Complete the following steps to enable the Intel Gigabit Ethernet Utility program:
1. Turn on the server and watch the monitor screen.
2. When the message
Press F1 for Configuration/Setup
appears during startup,
press F1.
3. From the Configuration/Setup Utility main menu, select Devices and I/O Ports
and press Enter.
4. Select System Board Ethernet PXE/DHCP and use the Right Arrow (
→
) key to
set it to Enabled .
5. Select Save Settings and press Enter.
For more information about using the Gigabit Ethernet Utility program, see the
User’s Guide on the IBM xSeries Documentation CD.
Using ServeRAID Manager
Use the ServeRAID Manager program to:
v
Configure arrays
v View your RAID configuration and associated devices
v
Monitor operation of your RAID controllers
Detailed information about using these programs is in the User’s Guide on the IBM
xSeries Documentation CD. Be sure to use these programs as described therein.
The latest information about these programs and the most recent device-driver files
are available at www.ibm.com/pc/support.
10
xSeries 206 Type 8482 and 8487: Hardware Maintenance Manual and Troubleshooting Guide