IBM 8038, Инструкция по установке и эксплуатации

Страница: 78 / 104

b. In the navigation pane, click Blade Configuration under the Blade Tasks
heading.
c.
Scroll down to the Service Processor LAN over USB interface are on the
Blade Configuration web page. The section lists all blades in the chassis
which are capable of enabling and disabling the LAN over USB interface.
d. Select the check boxes next to the blade or blades that you want to enable
or disable.
e. Click the Disable button to disable the LAN over USB interface on the
selected blades.
Configuring the LAN over USB interface manually
The IMM using the LAN over USB interface requires operating-system drivers and
other configuration. The firmware update package or Advanced Settings Utility
attempt to perform the setup automatically, if needed. If the automatic setup fails
or if you prefer to set up the LAN over USB manually, use one of the following
processes.
For more information about LAN over USB configuration on different operating
systems, see http://www-947.ibm.com/support/entry/portal/
docdisplay?brand=5000008&lndocid=MIGR-5083207 .
For more information about LAN over USB configuration on different operating
systems, see http://www-947.ibm.com/support/entry/portal/
docdisplay?brand=5000008&lndocid=MIGR-5083207 .
LAN over USB Windows Driver Installation
Use this information to install the LAN over USB driver for Windows.
When you install Windows, there will be an unknown RNDIS device in the device
manager. IBM provides a Windows INF file that identifies this device. The signed
version of the INF is included in all of the Windows versions of the IMM, UEFI,
and DSA update packages. Perform the following steps to install
ibm_rndis_server_os.inf .
Note: These steps only need to be performed if the server is running a Windows
operating system and the
ibm_rndis_server_os.inf
file has not been previously
installed. The file needs to be installed only once. It is required by Windows
operating systems to detect and use the LAN over USB functionality.
1. Obtain a Windows version of the IMM, server firmware, and DSA update
package (see “Updating firmware and device drivers” on page 57 for more
information).
2. Extract the
ibm_rndis_server_os.inf
and
device.cat
files from the firmware
update package and copy them to the
\WINDOWS\inf
subdirectory.
3. Go to Computer Management , then Device Manager and find the RNDIS
Device. Select Properties > Driver > Reinstall driver . Point the server to the
\Windows\inf directory where it can find the ibm_rndis_server_os.inf file
and install the device.
4. Go to Computer Management then Device Manager and right-click on
Network adapters and select Scan for hardware changes . A small pop-up
confirms that the Ethernet device is found and installed. The New Hardware
Wizard starts automatically.
5.
When you are prompted with the question, “Can Windows connect to
Windows Update to search for software?", select
No, not this time . Click Next
to continue.
64
BladeCenter HS23E Type 8038 and 8039: Installation and User's Guide