IBM 7985, Руководство по диагностике и обслуживанию

Страница: 201 / 218

– sel
Perform operations with the System Event/Error log.
– sysinfo
Display general system information that is related to the server and the
baseboard management controller.
v
Serial over LAN
Use the Serial over LAN capability to remotely perform control and management
functions over a Serial over LAN (SOL) network. You can also use SOL to
remotely view and change the server BIOS settings.
At a command prompt, type telenet localhost 623 to access the SOL network.
Type help at the smbridge> prompt for more information.
Use the following commands in an SOL session:
– connect
Connect to the LAN. Type
connect -ip ip_address -u username -p
password
.
– identify
Control the system-locator LED on the front of the server.
– power
Turn the server on and off remotely.
– reboot
Force the server to restart.
– sel get
Display the BMC system event log.
– sol
Configure the SOL function.
– sysinfo
Display system information that is related to the server and the globally
unique identifier (GUID).
Updating the UUID
You must update the Universal Unique Identifier (UUID) when you replace the
system board. To update the UUID, complete the following steps:
Note: You must attach an optional USB diskette drive to the server to run this
program.
1. Copy the UUID utility (uuid.exe) from the BIOS flash diskette to a DOS bootable
diskette.
2. Insert the diskette into a diskette drive that is connected to the server.
3. Restart the server from the diskette.
4. At the a:\ prompt, type
UUID /wr
, and press Enter. The utility generates a
random identifier.
5. Restart the server.
Chapter 6. Configuration information and instructions
183