IBM 7985, Руководство по диагностике и обслуживанию

Страница: 79 / 218

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 4, “Parts listing, System x3655, Type 7985 and 7943,” on page 93 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
166-198-000 System Management: Aborted
1. Run the diagnostic test again.
2. Correct other error conditions (including failed
system management tests and items logged in
the BMC error log and the system event/error log)
and retry the test.
3. Disconnect all server and option power cords
from the server, wait 30 seconds, reconnect the
power cords, and retry the test.
4. Replace the Remote Supervisor Adapter II
SlimLine, if installed.
5. (Trained service technician only) Replace the
system board.
166-201-000 BMC indicates I2C errors on bus 0. (Trained service technician only) Replace the system
board.
166-201-001 BMC indicates I2C errors on bus 1.
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board
166-201-002 BMC indicates I2C errors on bus 2. (Trained service technician only) Replace the system
board.
166-201-003 BMC indicates I2C errors on bus 3. (Trained service technician only) Replace the system
board.
166-201-004 BMC indicates I2C errors on bus 4. (Trained service technician only) Replace the system
board.
166-201-005 BMC indicates I2C errors on bus 5. (Trained service technician only) Replace the system
board.
166-201-006 BMC indicates I2C errors on bus 6. (Trained service technician only) Replace the system
board.
166-201-007 BMC indicates I2C errors on bus 7.
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board
Chapter 3. Diagnostics
61