IBM 7985, Руководство по диагностике и обслуживанию

Страница: 160 / 218

11. Remove the battery:
a. Use one finger to push the battery horizontally out of its housing.
b. Lift the battery from the socket.
12. Dispose of the battery as required by local ordinances or regulations. See
“Battery return program” on page 190 for more information.
Installing the battery
The following notes describe information that you must consider when replacing the
battery in the server.
v You must replace the battery with a lithium battery of the same type from the
same manufacturer.
v
To order replacement batteries, call 1-800-426-7378 within the United States and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call you IBM marketing representative or authorized reseller.
v After you replace the battery, you must reconfigure the server and reset the
system date and time.
v
To avoid possible danger, read and follow the following safety statement.
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v
Throw or immerse into water
v
Heat to more than 100°C (212°F)
v Repair or disassemble
To install the replacement battery, complete the following steps:
1. Follow any special handling and installation instructions that come with the
replacement battery.
2. Insert the replacement battery:
a. Hold the battery in a vertical orientation so the smaller side is facing the
housing.
b. Place the battery into its socket, and press the battery toward the housing
until it snaps into place.
142
IBM System x3655 Type 7985 and 7943: Problem Determination and Service Guide