IBM 7985, Руководство по диагностике и обслуживанию

Страница: 101 / 218

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 4, “Parts listing, System x3655, Type 7985 and 7943,” on page 93 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
BMC log message
Sensor
number
Sensor
type Action
ABR status 8F 0F Information only
CPU 1 status
Assertion 01 (Thermal
trip)
90 07 Information only; if the message remains:
1. Make sure that the fans have good airflow and are not
obstructed.
2. (Trained service technician only) Reseat the microprocessor.
3. (Trained service technician only) Replace the microprocessor.
CPU 1 status
Assertion 05
(Configuration error)
90 07 (Trained service technician only) Make sure that the
microprocessor is installed correctly.
CPU 1 status
Assertion 07 (Processor
presence detected) or 0A
(Processor automatically
throttled)
90 07 Information only
CPU 1 status
Assertion 08 (Processor
disabled)
90 07
1. Check the DIMM error LEDs on the system board.
2. (Trained service technician only) Reseat the microprocessor.
3. (Trained service technician only) Reseat the microprocessor.
4. (Trained service technician only) Replace the microprocessor.
CPU 2 status
Assertion 01 (Thermal
trip)
91 07 Information only; if the message remains:
1. Make sure that the fans have good airflow and are not
obstructed.
2. (Trained service technician only) Reseat the microprocessor.
3. (Trained service technician only) Replace the microprocessor.
CPU 2 status
Assertion 05
(Configuration error)
91 07 (Trained service technician only) Make sure that the
microprocessor is installed correctly.
CPU 2 status
Assertion 07 (Processor
presence detected) or 0A
(Processor automatically
throttled)
91 07 Information only
CPU 2 status
Assertion 08 (Processor
disabled)
91 07
1. Check the DIMM error LEDs on the microprocessor.
2. (Trained service technician only) Reseat the microprocessor.
3. (Trained service technician only) Replace the microprocessor.
CPU 1 temperature 98 01
1. Check all fans and remove any obstacles from the path of the
airflow.
2. Make sure that the room temperature is within the
recommended range.
Chapter 3. Diagnostics
83