IBM 6400 Series, Руководство по установке

Страница: 201 / 316

Print Format Menu
201
The following example shows both Top of Line and Bottom of Line text
positions for a 6 LPI line spacing:
Margins
NOTE: LEFT MARGIN and RIGHT MARGIN selections are not available with
the Coax/Twinax emulation. The only variable available with the
Coax/Twinax emulation is BOTTOM MARGIN.
The MARGINS parameter defines where the bottom, left, and right page
margins are located.
•
LEFT MARGIN defines where print position 1 is located. The left margin is
specified as the number of characters from the left edge of the forms.
Valid values range from 0 through 369 characters. The default is 0
characters.
•
RIGHT MARGIN defines where the last print position is located. The right
margin is specified as the number of characters from the right edge of the
forms. Valid values range from 0 through 369 characters. The default is 0
characters.
•
BOTTOM MARGIN defines the location of the last print line on the page.
The bottom margin is specified as the number of lines from the bottom of
forms position. Valid values range from 0 through 451 lines. The default is
0 lines.
Reset Command
Reset Command specifies the configuration that will be used by the printer
after the reset command is issued.
•
Load Factory will load the factory default configuration for printer use.
This is the default selection.
•
Load Power On will load the selected power on configuration for printer
use.