IBM 6400 Series, Руководство по установке

Страница: 267 / 316

Limitations
267
•
The coaxial portion of the IBM Coax/Twinax feature of this printer is
subject to the following limitations:
Minimum dot matrix of 9 wide by 8 high
Minimum dot matrix of 4 or 7 wide by 8 high
NOTE: The following features are not supported:
IBM 3287 Models 1C and 2C
Programmed symbols 2 and 4, 190 character downloadable fonts
Data analysis = APL feature
Graphic escape
•
The twinaxial portion of the IBM Coax/Twinax feature of this printer is
subject to the following limitations:
Minimum dot matrix of 9 wide by 8 high
Minimum dot matrix of 4 or 7 wide by 8 high
Print lines greater than 198 characters
•
IBM 6400 vs. 4234 IPDS Comparisons - 4234 Emulation Differences
The 4234 emulation will not support Load Symbol Sets (LSS)
The 4234 emulation will use Courier for all Near Letter Quality (NLQ)
mode printing, whereas 4234-NLQ mode was Gothic for 13.3, 16.7,
and 18 CPI. The dot sizes are different.
Also, the 6400 has a single dot size vs. three with 4234. For bar code
applications, some combinations of unit module width, wide-to-narrow
ratio, and element height may affect read rates.
The 4234 emulation will support image and font resolution of 120 x
144 pel, compared to 144 x 144 pel in the 4234. This will cause
images to change size vertically.
•
Proportional Space Mode (PSM) is not the same in your new printer.
Some differences will occur.
•
IBM 6400 vs. 4234 IPDS Comparisons - Differences:
The 6400 will report Loaded Font command set (LF2) in the Sense
Type and Model (STM), but will not support Load Symbol Set (LSS).
The 6400 will support Page Continuation Actions (PCA) without
highlighting.
The 6400 cannot detect Human Readable Information (HRI) outside
of the Bar Code Presentation space under all circumstances.
NOTE: For information on differences between this printer’s data stream
emulations and other printer data streams, such as the IBM
Proprinter III XL, please refer to the
6400 ASCII Programmer’s
Reference Manual .