IBM 6400 Series, Руководство по установке

Страница: 118 / 316

118
Chapter 4
Configuration Management Menu
Configuration Management Menu
The CONFIG. CONTROL menu allows you to control your printer’s
configurations according to the specifications necessary for your print jobs.
Recall Custom Set
The printer can store 8 custom sets in NVRAM. This parameter allows you to
select and load a specific custom set.
Factory Default is the factory–preset custom set; its parameters cannot be
changed. It is always available for loading.
Custom/Preloaded Sets 5-8 contain configuration sets that assist with the
installation and configuration of this printer. These sets are preloaded at the
factory. If these sets are not used, you can delete them and create new
custom sets. Following is a brief description of Custom/Preloaded Sets 5-7:
Configuration
Management
(from page 110)
Recall
Custom Set
Factory Default*
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
Save
Current Values
Custom Set 1*
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
Delete
Custom Set
Custom Set 1*
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
Change
Power On Set
Factory Default*
Custom Set 1*
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
Protect
Custom Sets
Disable*
Enable
Print Custom
Set Values
Current Custom Set*
Factory Default
Power On Custom Se
All Custom Sets
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
To view options, press:
To select an option, press:
To exit the configuration menus
and return to READY, press:
Scroll Scroll Enter Return
Enter
Start
* = Factory Default