IBM 6400 Series, Руководство по установке

Страница: 71 / 316

Setting Rear Paper Exit
71
9. Starting from the right ribbon spool, thread the ribbon around the right
ribbon guide, under the right tractor door, between the hammer bank
cover and ribbon mask, and along the ribbon path to the left ribbon guide.
10. Place the empty spool on the left hub.
11. Press the spool down until the hub latch snaps into place.
12. Turn the left spool by hand and check to ensure that the ribbon tracks
correctly in the ribbon path and around the ribbon guides.
NOTE: The 6400-020 printer automatically loads the ribbon when the first
print job is sent.
13. Close the forms thickness lever.
Cabinet Models
Pedestal Models
Left Ribbon
Spool
Left Ribbon Spool
Forms Thickness
Lever
Forms Thickness
Lever