IBM 6400 Series, Руководство по установке

Страница: 276 / 316

276
Appendix D
Attaching Printer to MVS Host S/370 and S/390 Systems
6400-LU1-SCS-Remote SNA 3174 Control Unit
LU1-SCS mode is utilized when neither IPDS nor PSF is needed to
accomplish the print function desired. An existing remote 3174 SNA-
connected control unit is assumed. The steps required to install a remote
LU1-SCS printer for host definitions are as follows:
1. Define to NCP, point to LU1 logmode entry defined below
2. Define to VTAM by adding logmode entry to VTAM Logmode Table
3. Define to JES2 (May not required if VPS. See details below)
4. Define to JES328X Print Facility, VPS, or equivalent product.
5. Select the options on the printer that are appropriate for the environment.
Step 1 - NCP Definition
XYZ GROUP TYPE=NCP,...
LINK ADRESS=(032),...
REMPU74 PU ADDR=C1,...
REM6400 LU LOCADDR=#,(# replaced by port on control unit)
DLOGMOD=6400SCSR,(Default LOGMODE ENTRY NAME)
MODETAB=MYTABLE (Table name containing MODEENT)*
Step 2 - VTAM Definition
* The following entry should be placed in the VTAM MODE TABLE specified
above or another of your choice.
6400SCSR MODEENT LOGMODE=6400SCSR,
FMPROF=X’03’,TSPROF=X’03’,PRIPROT=X’B1’,
SECPROT=X’90’,COMPROT=X’3080’,RUSIZES=X’87C6’,
PSERVIC=X’01000000E100000000000000’,
PSNDPAC=X’01’,SRCVPAC=X’01’