IBM 6400 Series, Руководство по установке

Страница: 90 / 316

90
Chapter 3
Using The Operator Panel
NOTE:
(1)
The Twinax and Coax interface menus only appear in the menus if
the IBM Coax/Twinax feature is installed.
(2)
The Early Print Complete option appears in the Twinax menu only
if the IPDS feature is installed.
(3)
IPDS, Code V Emulation, and IGP Emulation options appear in the
menus only if these features are installed. Menus are shown in
Appendix D.
(4)
Ethernet information only appears when the ethernet feature is
installed.
(5)
Ether the Ethernet Interface menu or the Parallel Interface menu
will display. They cannot display at the same time.
(6)
If installed.
(7)
Not if 4234-12 is running IPDS code.
(8)
Only if Autoswitching is enabled.
(9)
Only if Coax Emulation is enabled.
Using The Operator Panel
Figure 65. The Operator Panel
The operator panel is shown above. During the configuration process, you will
use the
Scroll
↑
, Scroll
↓
, Enter , and Return keys on the operator panel to
access configuration settings and diagnostic tests via the configuration
menus. As you access menus and options, menu names and option values
appear on the operator panel message display (sometimes referred to as
LCD, or Liquid Crystal Display).
This chapter provides numerous examples of how to use the operator panel
keys and indicator message display to configure the printer.
Form
Feed
Power
Ready
Processing
Attention
Menu
Micro
Printer Con-
figuration
Scroll
Micro
Scroll
Enter
Start
Return
Stop
Line
Feed
Cancel
Set Top
of Form
View
READY
Eject/
Restore