IBM 2027-R04, Инструкция по установке и обслуживанию

Страница: 76 / 116

SAN16M-R SAN Router Installation And Service Manual 52
SAN Router LEDs
Table 20 lists and describes the LEDs for the SAN Router.
NOTE:
In the
Meaning
column below, link means the Ethernet link is
detected, that is, the cable is plugged in and connected to an Ethernet port at
the other end. Initialized means the software has loaded all the necessary
routines and the SAN Router is operational.
Table 20
LEDs on the SAN Router
LED label Color Meaning
Sys Green and amber The LED is a dual-color (green/amber) LED.
During startup, the LED is amber and blinks rapidly on and off.
During normal operation, the LED is green and blinks slowly on and
off when power is flowing to the SAN Router.
The LED is off when there is no power to the SAN Router.
Errors, such as power outage, can also be viewed through the
Element Manager or SANvergence Manager. Refer to
Accessing
SNMP alerts or alarms for information on determining problems
Error None There is no LED for errors. Errors are available from the System Log
or via SNMP alerts. Errors can also be viewed through the Element
Manager or SANvergence Manager.
Power supply None There are no LEDs for the power supplies. Refer to Accessing SNMP
alerts or alarms for information on determining if a power supply has
failed.
FC/GE port LED (Ports 1
through 12) Green/amber This LED is a dual-color (green/amber) LED. Green stands for GE,
amber stands for FC. Both colors blink with traffic; the rate of blinking
indicates the amount of traffic. If the LEDs are off, there may be a
broken link or the port hardware may not be working. (If the port is
not being used, the LED will be off.)
Errors can also be viewed through the Element Manager or
SANvergence Manager. Refer to
Accessing SNMP alerts or alarms
for information on determining problem.