IBM 2027-R04, Инструкция по установке и обслуживанию

Страница: 69 / 116

45 Chapter 3: Maintenance and troubleshooting
Figure 11 Activate Boot Location dialog box
2. Click on the version you want to activate.
3. Click OK.
4. Choose Reset System from the
File
menu to make the version
active. Now the newest version becomes active and the prior
version is saved as inactive.
5. Close and restart the web browser to load the Element Manager
from the new version. After resetting the SAN Router, it may take
two or three minutes for the SAN Router’s embedded web server
to become ready.
Restore prior
firmware version
To restore the prior firmware version in the event you experience
problems on the network with the new version, use the following
procedure.
1. Select
Firmware Upgrade
from the
File
menu.
2. Click the
Activate
button to display the
Activate Boot Location
dialog box ( Figure 11 on page 45).
3. Click on the prior (now inactive) version in the
Activate Boot
Location
dialog box, then click
OK
.
4. Choose
Reset System
from the
File
menu to make the version
active.
i2640203