IBM 2027-R04, Инструкция по установке и обслуживанию

Страница: 72 / 116

SAN16M-R SAN Router Installation And Service Manual 48
Selecting
Reset System
from the
File
menu displays the
Reset Options
dialog box ( Figure 12 ).
Figure 12
Reset Options dialog box
•
Reset SAN Router
- This resets the hardware and firmware while
maintaining the existing configuration values. Be sure to select
this option if you want to maintain any values you have set
through configuration dialog boxes.
Reset to Factory defaults
- This resets the hardware and firmware and
restores the configuration values to the factory-defaults. Refer to
SAN
Router firmware default values
on page 32 for a list of these default
settings. Make sure that no conflicts will occur by resetting to these
defaults.
Troubleshooting overview
If you are experiencing problems with the SAN Router, the first and
most logical step is to make certain that all physical connections are
in place and connected properly as described in
Table 19,
Physical
FC/Ethernet Port Configuration
Configuration > Port > FC/Ethernet
The TCP port address, subnet mask, next hop
gateway, address, internal address
iFCP Setup
Configuration > iFCP > Setup
The local mSAN ID.
Management Port Configuration
Configuration > Port > Management
The management address and subnet mask
address.
Table 18
Resetting the system
Dialog box Parameter changed requiring reset
i2640205