IBM 2027-R04, Инструкция по установке и обслуживанию

Страница: 45 / 116

21 Chapter 2: Installing and connecting the SAN Router
Figure 4
Management port to management terminal connection
2. Set the PC terminal emulator settings to the SAN Router default
settings shown below in Table 10,
Terminal emulator settings
.
Ensure that the VT100 arrow emulation feature is on.
Task 6: Preparing the SAN Router for Element Manager access
Set the IP address for the network management port using CLI
The SAN Router has a 10/100 Management Port IP address. You
need to configure the SAN Router inband IP address. You do not
need to change the 10/100 Management Port IP Address for Element
Manager Access, but it must be set to an IP address appropriate for
CONSOLE
i2640004
1
Table 10 Terminal emulator settings
Parameter Setting
Bits per second 9600
Data bits 8
Parity bits None
Stop bits 1
Flow Control None