IBM 2027-R04, Инструкция по установке и обслуживанию

Страница: 56 / 116

SAN16M-R SAN Router Installation And Service Manual 32
SAN Router firmware default values
If you need to restore the default values in the firmware, review
Table 15,
SAN Router firmware default values via Element Manager
as the
table lists all default values and how you can change or view the
default values from Element Manager or SANvergence Manager.
.
Table 15
SAN Router firmware default values via Element Manager
Element Manager parameters Default setting Element Manager menu hierarchy
System
SAN Routing Cluster ID 1 Configuration>System>Operations
Allow Jumbo Frames on mFCP ports Disabled Configuration>System>Operations
Switch IP address 0.0.0.0 Configuration>System>Inband
Address
Switch Subnet mask 0.0.0.0 Configuration>System>Inband
Address
Default Gateway address 0.0.0.0 Configuration>System>Inband
Address
SNMP Read-only Password public Configuration>System>SNMP
Communities/Hosts
SNMP Read-modify Password private Configuration>System>SNMP
Communities/Hosts
SNMP hosts None defined Configuration>System>SNMP
Communities/Hosts
SNMP Traps None defined Configuration>System>SNMP Traps
SNTP Disabled Configuration>System>Date/Time
mSNS Client/Server Role Server Configuration>System>mSNS
Configuration
mSNS Priority 0 Configuration>System>mSNS
Configuration
mSNS Communication Port Number 50000 Configuration>System>mSNS
Configuration