- 13 -
I) CUTTING HEIGHT ADJUSTMENT LEVER
This lever serves to adjust the cutting height. Warning: if the cutting height is set too low
the following undesirable consequences may occur:
-
foreign objects such as stones, etc., may be thrown outwards
-
dirt and mud may accumulate inside the rotor guard, thus impeding regular discharge
of cut grass.
-
premature flail wear and possible breakage of the same.
L) HANDLEBAR ADJUSTMENT LEVER
The handlebars can be adjusted both vertically and laterally to suit the user and the working
conditions. Set the handlebars at user hip height.
M) ON SWITCH
Two-position switch:
(1) for starting the engine
(0) for switching off the engine
N) GEAR SELECTOR HANDLE
This handle is used to select the gears of the machine.
The numbered positions indicate the gear settings (1st - 2nd - Reverse ) and the letter N
indicates the neutral gear.
O) SLOW/FAST SPEED SELECTOR HANDLE
This handle is used to select the speed of the machine (slow/fast). Used in conjunction
with the gear selector handle (Fig. 2 Ref. N) it offers 4 forward gears and 2 reverse gears.
WARNING
WARNING
Be sure to set the handle positions correctly (Fig. 2 Ref. N and O), making sure that the
handles are correctly engaged; if they are not, engage the forward clutch lever
momentarily (Fig. 1 Ref. A) so that the speed setting engages correctly.
The above operation may prove particularly useful during the machine
’s first working
hours.
WHEN WORKING ON GRADIENTS ONLY USE THE SLOW SPEED BY KEEPING
THE SLOW/FAST CONTROL HANDLE IN THE
„SLOW” POSITION ( Fig. 2)
WARNING
Before operating the slow/fast speed handle (Fig. 2 Ref. O), the gear selector handle
(Fig. 2 Ref. N) should be put into neutral gear (N). Then select the desired gear.
H) FRONT GUARD
The front guard (Fig. 1 Ref. H) opens or closes automatically according to the amount of
grass to be cut. Use of the machine with the guard left open is strictly prohibited. This may
cause the outward projection of objects.
The guard may only be set in the open position during flail replacement operations with the
machine switched off.
Содержание IB 642 HD
