IBEA IB 642 HD, Инструкция по безопасности и эксплуатации

Страница: 14 / 44

- 14 -
Figure 3
Before switching on ensure that the machine has been fully assembled correctly.
7. ASSEMBLY INSTRUCTIONS FOR THE HANDLEBARS AND
FRONT SUPPORT WITH WHEELS
The flail mower is delivered with the handlebars and front support with wheels disassembled.
Remove the cardboard packaging or crate (to be disposed of in an appropriate manner, in
accordance with current regulations in force).
To assemble, proceed as follows :
§
Lift the handlebar and insert it in the support shown in Fig. 3 ref. B. Then fit the screw stay
(Fig. 3 ref. C) through the relative holes and secure it on both sides using the screws and
washers provided.
§
Position the support with front wheels and connect the height adjustment piece (Fig. 3 ref.
D) using the screw and washer provided. Fix it to both sides of the bonnet as well using the
screws, washers and spacers provided, as shown in Fig. 3 ref. A.
§
Fix the safety bar ( Fig.3 ref. E ) to the special holes on the two front sides of the wheel
support using the screws, washers and nuts provided.