- 40 -
ENGINE
FAULT
CAUSE
MEASURES TO BE TAKEN
Engine sluggish at switch on
1. accelerator not in start-up
position
2. Choke not closed
3. Petrol does not arrive
4. Air bubbles or water inside
the petrol lines
5. Thick oil prevents rotation
6. Winding
or
start
mechanism faulty
7. Spark
plug
in
poor
condition
1. move the accelerator to the
intermediate position
2. Close the choke when cold.
3. Check the fuel tank and
remove
any
water
or
sediment. Make sure that
the feed cock is open.
4. Check the lines and bands.
Repair
or
replace
if
damaged
5. Use oil with a viscosity
suited to the temperature
6. Replace winding or start
mechanism
7. Clean or replace spark
plug. Adjust the distance
between the electrodes.
Poor power
1. No fuel
2. Air filter blocked
3. Elastic bands worn
1. Refill the tank
2. clean air filter
3. replace elastic bands
Engine stalls
1. no fuel
2. feed cock shut off
1. Refill tank with petrol
2. open feed cock
Exhaust fumes dark
1. low grade fuel
2. too much engine oil
1. replace with high grade fuel
2. restore engine oil to correct
level
Engine emits black smoke and
power is poor
1. air filter blocked
2. choke not fully opened
1. clean air filter
2. open the choke completely
Exhaust fumes bluish
1. too much engine oil
2. Elastic bands worn
1. restore engine oil to correct
level
2. replace elastic bands
Silencer becomes red through
overheating
1. Air filter blocked
2. Inside
of
self-winding
starter blocked with grass
cuttings
1. clean air filter
2. clean self-winding starter
housing
For any problems not easily resolved or in case of doubt you are advised to contact your
dealer.
Содержание IB 642 HD
