IBEA IB 642 HD, Инструкция по безопасности и эксплуатации

Страница: 34 / 44

- 34 -
G) CHECKING AND REPLACING THE TRANSMISSION OIL
Check the transmission oil level using the relative level cap (Fig. 16 Ref. A). If oil leaks out
upon removal of this cap then there is enough of it in the transmission. If not, remove the filling
cap shown in Fig. 16 Ref. C, then top up with SAE 90.
The oil should be replaced after the first 20 hours of use and after this every 100 working
hours.
Remove the drainage cap shown in Fig. 16 ( Ref. B) and allow all the oil to run out. After
Refitting the drainage cap, fill the transmission from the filling cap with SAE 90 transmission
oil.
Refit the lid securely to prevent any leakage of oil.
The total quantity of oil in the transmission is 1,9 l.
Figure 16