Manual
ibaMS4xUCO
38
Issue 1.5
3.
In the following step, you can select
further settings, like “counter reset on N”, input
circuit and input signal level.
It is also possible to enable the expert mode. In expert mode, you can configure all
settings. If expert mode is active, it is not possible to undo this. You can only restart
the editor and cancel all settings.
Note
The expert mode is recommended only for experienced users.
4.
All further configuration options are described in the help window or explained in the
manual, see chapter 7.4.
With <Open> you can open an existing configuration file, using the <Save> button you
can save a new or modified encoder parameter file, with <Restart> all settings will be
reset and the EPF editor will be restarted.
9.1.2
Upload the encoder parameter file to ibaPADU-S-IT-2x16
The encoder parameter file can be loaded onto the central unit via FTP, e. g. via the
Windows file explorer:
1.
Establish an Ethernet conection between central unit and computer.
2.
Enter in the command line of the Windows file explorer:
ftp://uco:ucouco@<IP address of ibaPADU-S-IT>
User:
uco
Password:
ucouco
