Manual
ibaMS4xUCO
66
Issue 1.5
11.2
Connection modes
The following connection modes are only examples and have to be adapted to the re-
spective encoder data sheet of the manufacturer.
11.2.1
Incremental encoder
11.2.1.1
Single ended („SE“) TTL
Usually, the output circuit of the rotary encoder is designed as
push-pull amplifier
. In
this case, the ibaMS4xUCO module is connected as follows:
In case the output circuit is an
open collector
, the ibaMS4xUCO module has to supply
the required voltage.
For TTL, this can be done using the internal encoder supply (5 V):
You have to do the following entries in the encoder parameter file (XML):
