GO-2400MC-PGE-1 | GO-2401MC-PGE-1 | User Manual (Ver. 1.0)
Settings List
- 85 -
Digital IO Control
Item
Setting
Range
Default
Description
Line Format
-
Opto Coupled Display the current I/F type.
Line Status All
-
0x00
Display status of input signal.
User Output Selector
User Output 0
User Output 1
User Output 0 Set the user output signal.
User Output Value
False
True
False
Set the value for the User Output selected in User Output Selector.
PulseGenerators
Configure pulse generator settings.
LUT
Control
Item
Setting
Range
Default
Description
Clock Pre-scaler 1 ~ 4096
165
Set the division value for the prescaler (128-bit length) using the pixel clock as the base
clock.
Pulse Generator
Clock (MHz)
0.018127 ~
74.25
0.45
Set the clock used for the pulse generator. This value is calculated using the Clock Pre-
scaler value as a base.
Pulse Generator
Selector
Pulse
Generator 0
Pulse
Generator
0
Select the pulse generator.
Pulse
Generator
Length
1 ~ 1048575
30000
Set the maximum count-up value as a clock count.
Pulse
Generator
Length (ms)
0.002222 ~
2330.166666
66.6667
Set the maximum count-up value in milliseconds. This value is calculated using the Pulse
Generator Length value as a base. The setting range varies depending on the Clock
Pre-scaler value.
Pulse
Generator
Frequency
(Hz)
0.429154 ~
450000
15
Set the maximum count-up value as a frequency. This value is calculated using the Pulse
Generator Length value as a base.
Pulse
Generator
Start Point
0 ~ 1048574
0
Set the start point of the High interval as a clock count. When the counter reaches this
value, the output will be 1.
Pulse
Generator
Start Point
(ms)
0 ~ 2330.16
0
Set the start point of the High interval in milliseconds. When the counter reaches this
value, the output will be 1. The setting range varies depending on the Clock Pre-scaler
value.
Pulse
Generator
End Point
1 ~ 1048575
15000
Set the start point of the Low interval as a clock count. When the counter reaches this
value, the output will be 0.
