5. IWARM Floor Heating System Installation
You can install your system independently following the
instructions in this instruction. We recommend you to turn to
a qualified electrician though. For quality installation and
connection of the system which will ensure its warranty peri
od you can also call our technicians or regional service cen
ters (see paragraph 12, page 37– 38). Remember that reli
ability of your heating system is 99 %dependent on the
installation quality.
To install your system it is necessary:
1. To prepare the room (see paragraph 4.1 of this
instruction).
2. To mark the area for the heating section considering
50 mm, min.,
spaces from the walls and furniture.
Also consider
100 mm, min.,
spacing between the
heating cable and other heating sources.
If few sections are to be put in one room, once again
make sure that your floor area corresponds the effi
ciency of the heating sections. Divide marked out area
for installation of the heating sections according to
their layout surface.
3. Choose locations for your thermostat and service box
(if any), and make mounting holes for them at a height
of 30 cm, min., above the floor level, and a groove in
the wall to put mounting cables and temperature gage
wire in.
www.iwarm.com
Spooled Underfloor Heating Kit
12
Содержание Spooled Kit
Страница 1: ...INSTALLATION MANUAL ...
Страница 38: ...Spooled Heating Kit ...