![background image](http://html.mh-extra.com/html/i-warm/spooled-kit/spooled-kit_installation-manual_601963023.webp)
J
After the solution has dried up, the I-WARM floor
heating system is ready to work. Turn it on following
the instructions in the thermostat certificate.
б. If the heating system is to be installed in a
screed, the installation procedure is as fol
lows:
J
Clean away any garbage or dust from the floor.
J
If the sections are to be put in a screed, it is recom
mended to put the sections onto thermal padding,
which will allow for 10–30 % electric heating sys
tem energy saving. See the
Appendix
for recom
mendations on thermal insulation choice.
J
Fix pieces of assembly tape. They shall be fixed in
places where heating sections loops will end (along
opposite sides of the area) and with 0.5 m gaps to
fasten section loops in the middle.
J
Mark the beginning of the heating section which
shall be close to the service box and a thermostat
location (within 2.5 m distance).
J
Put and fix a heating section. You will need:
— To fix heating cable next to the splicing box near the
cabling beginning. Bring mounting cable along a
wall groove next to the service box or to the ther
mostat location.
www.iwarm.com
Spooled Underfloor Heating Kit
22
Содержание Spooled Kit
Страница 1: ...INSTALLATION MANUAL ...
Страница 38: ...Spooled Heating Kit ...