I WARM Spooled Kit, Руководство по установке

Страница: 17 / 38

— Make sure you can get the gage out the tube.
— Seal the floor groove with adhesive solution or
cement it in.
— After the solution hardened, mark the temperature
gage location.
J
Clean away any garbage or dust from the floor.
J Fix pieces of assembly tape. They shall be fixed in
places where heating sections loops will end (along
opposite sides of the area) and with 0.5 m gaps to
fasten the section loops in the middle.
www.iwarm.com
Spooled Underfloor Heating Kit
16
You will not need to break the floor
to replace the temperature gage You will need a gage location
mark when putting the cable