I-Tech I-TECH 10000, Руководство пользователя

Страница: 23 / 44

IACER Srl 19 MNPG179
First, the device will ask to enter the PIN (default password set to 0000);
after inserting the correct PIN the display will show the main menu.
Main menu
The I-TECH LA8000/10000 laser therapy equipment can be used in either of
two work modes: with emission of the beam in POINT mode or in SCANNING
mode.
POINT EMISSION permits the emission of laser points of a specific Power,
Duration and Area of Action; the operator can set these data by selecting
one of the therapy protocols already saved on the machine or by modifying
the parameters directly as required.
SCANNING EMISSION permits manual emission of the laser beam, and in this
case the following parameters can be set:
maximum emission time and
power . The OPTICAL FIBRE is used to emit the power; it is very user-friendly
and guarantees a high degree of efficiency.
One of the unique features of the I-TECH LA8000/10000 is the HANDPIECE.
This special device permits defocusing of the beam for treating areas of
tissue of different sizes, from 0.4 to 10 mm
2
. The equipment works most
efficiently with the spacer fully extended, for a laser output of 10mm
2
. This
special HANDPIECE therefore ensures a broader range of action and a higher
degree of accuracy for the anatomical area to be treated.
In the “FREE” section t he operator can edit the treatment parameters at will.
In particular, the parameters in question are:
-
number of Points (1 to 9) or the Area to be treated (5 to 200cm
2
).
-
Power of the laser (1W to 8W).
-
Modulation : continuous or cyclical supply of power; in the latter case,
the Duty Cycle can also be set.
-
Density , i.e. the amount of energy to be emitted per cm
2
.
-
Time , i.e. the effective duration of therapy.
M eanwhile in the “PATHOLOGY” section, t he I-TECH LA8000/10000 offers
the operator a list of therapy protocols that can be used to prepare specific
treatments.
The protocols are based on many years of experience in offering assistance
to qualified and experienced users. The various protocols are listed at
paragraph
Programs’ list . When a protocol is selected, the work parameters
are summarized on the display and the user is prompted to confirm and
proceed with execution by simply pressing the ENTER key and following the
instructions further on.