I.R.I.S. POWERSCAN 9.5, Руководство пользователя

Страница: 24 / 182

Chapter 2 – Installation
16
I
NSTALLING YOUR SCANNER
1. Install your scanner driver
Your scanner is provided with scanner drivers that must be installed
on your computer.
To install your scanner, you must first insert your scanner driver
installation CD-ROM into your computer CD-ROM drive and run
the installation.
Once your scanner is installed, it is recommended to make a few
scanning tests with a standard scanning application (e.g.: Microsoft
Office Document Imaging).
Note:
If your scanner is equipped with a Twain driver, note that version 1.9 or
higher is highly recommended. See About IRISPowerscan, Supported
scanners.
2. Plug in your hardware key
Do not forget to plug the hardware key provided with your software
package. This key determines the maximum scanning speed (in
number of images per minute) of IRISPowerscan.
Insert the key into the parallel or USB port of your PC.
Further steps
Scanner selection
When running IRISPowerscan, you will be automatically prompted
to confirm the scanner selection. If you want to scan documents, do
not forget to confirm the selection. This will disable the
Emulation
Mode * that is set to run by default in the application. See:
Scanning, Scanner selection
(*) A series of emulation images are provided with the application for demonstration
and testing purposes. The Emulation Mode that enables to run these emulation
images is activated by default. If you do not connect a scanner to IRISPowerscan, the
Emulation Mode remains activated.