I.R.I.S. POWERSCAN 9.5, Руководство пользователя

Страница: 17 / 182

IRISPowerscan
TM
– User Guide
9
2. Refine or modify the default settings (Project Setup)
If the pre-configured project you have chosen does not totally match
your needs, you can refine or change some of its default settings.
The project settings can be accessed from the user interface, in the
Project Setup window. See: Project Setup.
3. Launch the required processing steps
Once you have chosen a project and possibly refined its settings,
your project is ready for use. You can then launch any of the
required processing operations from the user interface. See: About
IRISPowerscan, IRISPowerscan processing steps.
IRISP
OWERSCAN PROCESSING STEPS
Here are the main processing steps that can be carried out in
IRISPowerscan. Depending on your project configuration, you will
launch one, two or more of the described steps. All processing steps
can be launched from the user interface.
Scanning
Before you start scanning, you must make sure your scanner has
been properly installed, then set your scanner settings (resolution,
color, image pre-processing, etc.). You will then put your
documents in the scanner feeder then start scanning. Your scanned
documents will directly appear in the image viewer as well as in the
explorer. See: Scanning: Scanning operations.
If some automatic indexing has been set for the project, it will take
place during the scanning. This automatic step is totally transparent
for the user.
Index validation
(if required)