Hytera PD70X Series Скачать руководство пользователя страница 3

Страница: 3 / 182

Copyright Information

Hytera is the trademark or registered trademark of Hytera Communications Co., Ltd.

(the Company) in PRC and/or other countries or areas. The Company retains the

ownership of its trademarks and product names. All other trademarks and/or product

names that may be used in this manual are properties of their respective owners.

The product described in this manual may include the Company’s computer

programs stored in memory or other media. Laws in PRC and/or other countries or

areas protect the exclusive rights of the Company with respect to its computer

programs. The purchase of this product shall not be deemed to grant, either directly

or by implication, any rights to the purchaser regarding the Company’s computer

programs. Any of the Company’s computer programs may not be copied, modified,

distributed, decompiled, or reverse-engineered in any manner without the prior

written consent of the Company.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual,

but no warranty of accuracy or reliability is given. All the specifications and designs

are subject to change without notice due to continuous technology development. No

part of this manual may be copied, modified, translated, or distributed in any manner

without the express written permission of us.

If you have any suggestions or would like to learn more details, please visit our

website at: http://www.hytera.com.

Software Version

All the features in the system planner is based on R5.0 or above.

Содержание PD70X Series























































































































































































Результаты поиска

Содержание PD70X Series

Отзывы:

Похожие инструкции для PD70X Series

Бренды по названию

Популярные бренды

Hytera PD70X Series, Руководство по планированию систем

Результаты поиска

Содержание PD70X Series

Отзывы:

Похожие инструкции для PD70X Series

Бренды по названию

Популярные бренды