HYT TM-628H Скачать руководство пользователя страница 28

 26

message. The receiver radio will reply with a message automatically upon receipt of the Safety 

Check message.   

HDC2400

TM 

 

HDC call list select (HDC List) 

1. Press 

the 

HDC Call Select

 key (Programmable function key) and the preset number or alias in the 

HDC list will be displayed on the LCD.   

2. Press 

/

 to make an selection from the preset options in the HDC call menu, and then press 

P4

 

to access the options.   

3. Press 

PTT

 or 

P4

 to transmit the call.   

The HDC signaling can achieve selective call (individual call, zone call, fleet call and broadcast), call 

alert and system functions (Stun, Revive and Safety Check)), etc. 

System call features the following functions: 

Stun----permits an authorized radio to disable another radio from a remote place, making it capable 

of receive only. 

Revive----permits an authorized radio to revive a stunned or killed radio from a remote place.   

Safety Check----permits the dispatch center or an authorized radio to transmit the safety Check 

message. The receiver radio will reply with a message automatically upon receipt of the Safety 

Check message. 

 

Short Message 

The short message function is based on HDC2400

TM

 technology platform. Thus the optional signaling 

must be set to HDC2400

TM

 on the current channel for both the transmitting and receiving radios. 

The short message function is operated through multi-level menu, which can realize the function of Edit, 

Save, Read, Send, Protect and Delete of short message. Press the 

Message

 key (programmable 

function key) in user mode to enter the short message menu.   

The short message inbox can save up to 32 short messages, with each containing up to 48 

alphanumeric characters. 

The short message outbox can save up to 8 short messages, with each containing up to 48 

alphanumeric characters. 

The radio supports up to 32 fixed short messages, with each containing up to 31 alphanumeric 

characters. 

Содержание TM-628H



































Отзывы: