
17
Channels in the scan list are allowed to be temporarily deleted
When the scan pauses on an unwanted channel, such as a nuisance channel, press the programmed
Add/Del Scan
key to temporarily delete the channel from the scan list, and then the scan reinitiates
immediately.
Note:
The temporarily deleted channel will recover its settings prior to the scan after the radio
exits the scan mode.
▇
Revert Channel
If you press the
PTT
key, the scan will be turned off and the radio will switch to the Revert Channel to
transmit. This feature is programmable by your dealer.
▇
Off-Hook Scan
If this feature is enabled by your dealer, the radio will be allowed to scan no matter whether the palm
microphone is in an off hook position or not. Otherwise, the scan will be disabled with an off-hook palm
microphone.
Busy Channel Lockout (BCL)
The feature helps prevent transmission on a channel that is already in use, and it can be
enabled/disabled by your dealer. If you press the
PTT
key on a busy channel, transmission will be
inhibited and an alert tone will sound. If the
PTT
key is released, the alert tone will cease and the radio
will return to Rx mode. When the channel is free, press the
PTT
key again to transmit.
BCL Override
If this feature is enabled, you can override the BCL feature to transmit on a busy channel. If you press
the
PTT
key, a BCL alarm will be heard; press the
PTT
key again within 0.5 seconds to override the BCL
feature and transmit on the busy channel.
DTMF Call
▇
Manual Dial
Hold down the
PTT
key, and then press any key on the DTMF keypad of the microphone to transmit the
corresponding DTMF signal. Meanwhile, you may hear relevant tones.
Release the
PTT
key to remain transmission for 2 seconds (programmable by your dealer), and then
press another numeric key within 2 seconds to continue the transmission.