20
transpond if a zone call is received.
▇
Transmit
1. Hold down the
PTT
key
2. During encoding, the LED lights red.
Please refer to the
TTS
key for 2-Tone encoding.
3. Upon
release
the
PTT
key, the signaling squelch is disabled; the
icon flashes on the LCD,
and LED flashes orange. The LED lights green while signal is received, and flash orange if signal off.
4. If
the
programmed
Monitor
key is pressed, or no signal is received within the preset time period, the
signaling squelch is enabled.
Off Hook Decode
If this feature is enabled by your dealer, CTCSS/CDCSS signaling is active no matter whether the palm
microphone is in an off hook position or not. If the feature is disabled, CTCSS/CDCSS signaling is
disabled with an off-hook palm microphone is in the off hook condition.
Time-out Timer (TOT)
▇
Time-out Timer (TOT)
This feature is able to prevent any single user from using a channel for an extended period, and to
protect the radio against damage caused by prolonged transmission.
If the preset time (off, 15~1200 seconds) expires, the radio will automatically terminate transmission and
keep beeping. Beeps will not stop unless the
PTT
key is released.
The TOT default is 180 seconds, which can fully satisfy common users. Any change should be permitted
by professional technicians.
▇
TOT Pre-alert
With a TOT Pre-alert timer, the radio can generate pre-alert tone at the programmed time (1~10 seconds
before the TOT timer expires).
▇
TOT Re-key Time
The radio features a TOT Re-key timer. If the transmission is terminated due to expiration of the TOT
timer, the TOT Re-key timer will be activated. The transmission will be inhibited if the
PTT
key is pressed
before the expiration of TOT Re-key timer (programmable by your dealer as Off, 1~60 seconds).