
18
▇
Keypad Auto PTT
If this feature is enabled by your dealer, press any numeric key to transmit DTMF signal without
PTT
key
press.
Stor
▇
e & Send
When this feature is enabled, enter a pre-stored DTMF number (up to 16 digits) in Rx mode, and then
press the
PTT
key on the microphone to initiate a call; simultaneously, the dialed DTMF number scrolls
across the LCD, and the corresponding DTMF tone can be heard.
Note:
If you have dialed a wrong number or you want to cancel the dialing, you just simply press any key
on the front panel other than the
Power On/Off
key to exit.
“D” can be programmed by your dealer as a blank tone, that is, if you enter “D”, the tone will not be
heard during transmission, but there will be a delay in time, which is programmable by your dealer.
▇
DTMF Speed
The DTMF number is programmable by your dealer.
The feature is designed to reduce decoding errors by providing a fixed interval between digits. It is 10
DTMF numbers per second by default.
▇
Store the DTMF Number
You are allowed to store a DTMF number (up to 16 digits) in 32 Speed Dial memories respectively as
follows:
1. Press the
#
key on the microphone keypad, and the LCD displays D ------.
2. Enter the desired number (range from 0~9, A~F) via the microphone keypad. If you want to enter A, B,
C, D, E and F, hold down the
PTT
key and then enter 2, 5, 8, 0, * and # respectively.
3. Press the
#
key, and “D” on the LCD is followed by a symbol “ --”, which indicates the location to enter
memory numbers.
4. Enter the desired memory number (01~32).
5. Press the
#
key again on the microphone, and then the entered number is stored into its
corresponding memory.
If you have dialed a wrong number or you want to cancel the dialing, please press any key on the front
panel other than the
Power On/Off
key to exit.
▇
Confirm the Stored DTMF Numbers