
16
The scanning pauses or ceases upon the following:
1. Press the programmed
Channel Scan
key and cease the scanning, so that the radio may exit the
scan mode.
2. Activate the Monitor function.
3. The radio receives the carriers which satisfy radio unmute condition
▇
Scan Resume
If the scanning pauses on an active channel, it will resume according to the scan resume mode. The
scan resume mode can be programmed by your dealer with Carrier operated scan or Time operated
scan.
1. Time Operated Scan
Scanning remains on an active channel for a programmed time period (programmable by your dealer).
Once the timer expires, the radio will begin scanning other channels even if the active channel is still
busy.
2. Carrier operated scan
If carriers are detected during the scan sequence, scanning will remain on the active channel until there
is no activity.
▇
Dual Priority Scan
If dual priority channels are programmed by your dealer, the radio will check the dual priority channels for
activity regularly on the non-priority channels. If carriers are detected on a priority channel, the radio will
immediately switch to this active priority channel.
LCD displays the “
P
" icon to indicate the Priority Channel 1, the “
P.
” icon to indicate the Priority Channel
2, and the “
P:
” icon to indicate the channel is programmed with Priority Channel 1 and 2 simultaneously.
▇
Scan Add/Delete
If the Scan Add/Delete feature is enabled by your dealer, the current channel can be added to/deleted
from the scan list in the following procedures:
1. Select the channel to be added/deleted in the non-scan mode.
2. The current channel toggles between Add/Delete status upon each press of the programmed
Scan
Add/Delete
key.
Note:
Only channels added into the scan list can be scanned.
Nuisance Channel Delete
▇